Home
About Us
Maintenance Concerns
Cylindrical vs. Disk
American Lincoln
R.P.S. Factory Cat
Nilfisk Advance
MADVAC Vacuums
Value Machines
Refurbished Machines
Rentals
Detergents
Parts & Service
Contact Us

 

New Location

Caliber Equipment, Inc.

11482 Fox Cross Rd.

Ashland, VA 23005

 

E-Mail

Calibereq@aol.com

 

Back to Model List

Nilfisk Advance industrial sweeper scrubber authorized distributor

 

"Warrior" Cylindrical and Disk Walk Behind Floor Scrubbers - 28 and 32 inch scrub path versions

Cylindrical Scrubbers have two machine width brooms that sweep solid debris into a tray while also washing the floor.  You eliminate pre sweeping the floor for greater productivity. Two cylindrical brushes operate at 900 RPM (4 times the disk style speed).  Three pressure levels are offered from 80 to 120 lbs.

     

Disk Scrubbers wash, or strip wax from the floor.  Disk machines offer easy to change, variably aggressive, pads or brushes. They spin at 220 RPM on the Warrior, less than the cylindrical, but they keep more surface area in contact with the floor than the cylindrical brush.  Three pressure levels are offered from 90 to 250 lbs.   

     

Both offer excellent performance, but we recommend the disk on hard to clean jobs and cylindrical where solid debris is prevalent.

This is a true industrial grade, "smart" walk behind floor scrubber, available in both 28 and 32 inch scrub paths.  Each has 30 gallon solution and recovery tanks.  These 36 volt scrubbers are operated by six batteries for a long run time.  Different battery packages will offer different levels of run times.  Up to 4.5 hours of continuous use is available.

Simple to operate, easy to train.  A single touch to the control pad, positions the scrub deck on the floor, and readies the vacuum motor and solution solenoid to operate with the two scrub brushes.  A light push on the handle bar, and the machine propels itself forward and the brooms rotate.    Control buttons offer three pressure levels and three water volume levels.  All these automatic functions make this walk behind easy to learn and easy to operate.   A lever that lowers the squeegee into position is the only manual function. The control panel picture below shows the green "GO" button, and the red "STOP" button.  Simple and highly maneuverable.

AXP versus ST versions.  ST (Standard)  AXP (automatic cleaning solution dispensing option)

AXP versions will dispense a variety of cleaning solutions (from standard concentrations to super concentrations) from an "on board" dispensing tank.  Advantage: This features allows you to control your concentrate usage in two ways.  You can set the dispensing level for normal operation, adjust it for higher of lower settings, or completely turn it off when soap is not required.  This saves you dollars in terms of avoiding wasted cleaning solution.

Now featuring an "on board: charger option.  For people that move their scrubber to different scrub areas, this saves you wear and tear on heavy independent chargers being relocated. The convenience also improves the likelihood that the scrubber will be charged at the completion of the work.  

Pricing: about $ 9,000 to 11,000

 
 

©2003-2008 Caliber Equipment, Inc.  All Rights Reserved

Caliber Equipment Nilfisk Advance Industrial and Commercial Floor Scrubbers