
1.888.550.0945
calibereq@aol.com
Serving Virginia, West Virginia and Southern Maryland and the World Since 1996


Advance Adgressor 2820 / 3220 / 3520 / 3820
Industrial Rider Scrubber
This machine is available NEW or REFURBISHED.
*Nilfisk Advance machine sales are subject to territorial limitations.
Styles available: Cylindrical Vs. Disk
28 inch cleaning path with a cylindrical or disk style scrub deck. Model 2820
32 inch cleaning path with a cylindrical or disk style scrub deck. Model 3220
35 inch cleaning path with a cylindrical or disk style scrub deck. Model 3520
38 inch cleaning path with a cylindrical or disk style scrub deck. Model 3820
Advantages:
• A 36 volt rider scrubber with six industrial batteries combines long run times with large solution capacity for greater productivity. 305 amp hour or 395 amp hour battery packages available.Industrial version -"Adgressor" versus the Commercial version - "Advenger"
• A single touch to the control pad, positions the scrub deck on the floor, and readies the vacuum motor and solution solenoid to operate with the scrub brushes. Triple pressure settings on the control pad will adjust the brush actuator to the desired pressure level - up to 250 pounds! Another actuator lowers the squeegee onto the floor in order to recover the used solution. With a light press to the foot pedal, the machine propels forward and the brushes rotate through the cleaning solution. All these automatic functions make this small rider easy to learn and easy to operate. This is a true industrial grade, rider scrubber.
• Cylindrical decks for this scrubber are available in all scrub path widths: Two cylindrical brushes operate at 900 RPM (3 times the fastest disk style speed). Cylindrical scrubbers have two machine width brooms that sweep solid debris into a tray while also washing the floor. You eliminate pre sweeping the floor for greater productivity. This 36 volt scrubber is operated by six batteries for a long run time.
• Disk decks for this scrubber are available in all scrub path widths: Both disk style scrub brushes operate at 250 RPM. Disk scrubbers wash, or strip wax from the floor. Disk machines offer easy to change, variably aggressive, pads or brushes. Disk machines typically will have more brush surface area on the floor for greater polishing effectiveness.
• Optional "AXP" System: A soap conservation system that offers an easy way to utilize concentrated cleaning solutions by setting high ratios of soap to water. AXP systems will allow you to dispense detergents in a mixture of water to soap at ratios from 400:1 all the way down to 32:1. This optional system allows you to minimize the use of soap while operating the scrubber - thereby conserving soap and controlling your operating costs. This system is available on ALL models of the Adgressor!
• New machine warranty: Covers parts for three years and labor for two years. Dealer paid travel limited to 180 days. Tank warranty is for eight years. Note: there is no machine hour limit.
• Nilfisk Advance has offered this scrubber in a Commercial Version: The Advenger which is slightly less expensive.
• Commercial: 30 gallon solution and recovery tank
- Industrial: 42 gallon solution and recovery tank.
• Commercial: Up to a 305 amp hour battery pack
- Industrial: has up to a 395 amp hour battery pack.
• Commercial: Has a .80 hp drive motor
- Industrial: has a 1.5 hp drive motor, (to handle a 20% grade - 11.5 degrees).
• Commercial: No corner protection
- Industrial: has steel plates attached to protect corners from scratches
New Machine:
Price Range: $13,500 to $18,000
Refurbished Advance Adgressor
Available for purchase is a refurbished Nilfisk Advance Adgressor Model battery powered floor scrubber.
Model 2820 Disk: It scrubs a 28 inch wide path. Actual scrub rates are over 43,000 square feet per hour when traveling at 3.5 mph. The standard disk style that is often used with “finished” floors (or where this simplicity of design is most practical).
• 28 inch deck.Refurbished Priced:
• Manufactured in 2004.
• Caliber Equipment will warranty your refurbished machine for labor and parts for two months.
Model 2820 - Model Year 2004
Price: SOLD


New Machine:
Price Range: $15,500 to $21,000
Refurbished:
CALL for Availability!

Operator's Manual
Parts Manual

Clicking on an image will enlarge it






